Aquatec 5513-1E01-J606 Pump 6.0 gpm, 1/2 FPT, 115VAC

The Aquatec 5513-1E01-J606 Pump is used to either draw water from a holding tank and pressurize it, or boost pressure from a low pressure source. Although designed to operate intermittently, many 550 versions can run continuously for several hours at a time. These pumps can be operated either in demand mode (pressure switch controlled) or in delivery mode (controlled by external power switching device). If needed, an integral bypass can be used to limit pressure. This pump features a 5-chamber construction. NSF Certified.This pump has been independently tested and certified against NSF/ANSI Standard 58. Made in the USA.The Aquatec 5513-1E01-J606 has been proudly manufactured in the USA.Features:Self-primingUnparalleled performance, efficiencyWhisper quiet at lower flowsMinimal pulsations7 year design lifeRuns dry without damageChemically resistant versionsClosed impervious diaphragmIndependent symmetrical valvesHighest structural integrityEngineered composite plasticsCorrosion resistant metalPressure switch and transducer optionsTen point clamping

• The Aquatec 5513-1E01-J606 Pump is used to either draw water from a holding tank and pressurize it, or boost pressure from a low pressure source. Although designed to operate intermittently, many 550 versions can run continuously for several hours at a time.
• This pump can be operated either in demand mode (pressure switch controlled) or in delivery mode (controlled by external power switching device). If needed, an integral bypass can be used to limit pressure. This pump features a 5-chamber construction.
• NSF Certified.This pump has been independently tested and certified against NSF/ANSI Standard 58. Made in the USA.The Aquatec 5513-1E01-J606 has been proudly manufactured in the USA.
• Features: Self-priming | Unparalleled performance, efficiency | Whisper quiet at lower flows | Minimal pulsations | 7 year design life | Runs dry without damage | Chemically resistant versions | Closed impervious diaphragm | Independent symmetrical valves | Highest structural integrity | Engineered composite plastics | Corrosion resistant metal | Pressure switch and transducer options | Ten point clamping
• Amps 0.75-1.75 Amps @ 0-60 psi | Diaphragm Materials Santoprene | Flow Rate 6 GPM | Housing Material Polypropylene | Inlet/Outlet Connection 1/2" FPT | Liquid Temperature Max 140 °F | Motor RPM 2400 RPM Origin Made in USA | Pressure Switch 60 PSI | Series 5500 | Size 1/2" | Suction Lift Self prime up to 11 ft | Voltage 115VAC | Wire Option Wall Plug